Air conditioning may ensure your comfort during the summer but running it non-stop during a heat wave will have you cringing when your utility bill arrives in the mail. The good news is that there are several ways you can beat the heat this summer without increasing your energy bills.
Here are some energy efficient ways to beat the heat that’ll pay off immediately.
Use your ceiling fans wisely. During the summer, ceiling fans should rotate counterclockwise to push cool air down, creating a wind chill effect. This allows you to set the thermostat at a higher temperature without sacrificing comfort. Portable fans produce the same effect. Turn them off when you leave the room.
Draw the curtains. During the day, room temperatures can rise by as much as 20 degrees, especially in areas with windows that get direct sunlight. Keep your curtains closed during the summer. Blackout curtains are often the most effective at reducing heat gain.
Switch out your light bulbs. Incandescent light bulbs produce a lot more heat than you might think. They are also considered the least energy efficient. LEDs (light emitting diodes) use only 20-25% of the energy and last up to 25 times longer than the traditional light bulbs they replace. Choose bulbs that are ENERGY STAR certified.
Clean or change you’re A/C filters once a month. Your air conditioner consumes 5-10% more energy if the filter is clogged or dirty. You should change or clean the filter out on your A/C unit once a month.
Avoid using your stove or oven during the day. One of the last things you want to do on a hot day is generate more heat. Wait until sundown to use your stove or oven. Use smaller appliances, such as hot plates, crockpots, pressure cookers, and microwaves during the day. Small appliances have the added benefit of being energy efficient.
Install new insulation. Properly installed, insulation can help keep your home an average of 20 degrees cooler or warmer year-round. It will also reduce your energy bills. Look for insulation with a high R-value (the insulation’s ability to reduce heat transfer). You can choose between fiberglass, cellulose, and spray foam insulation for this project.